Conócenos

Silver Nanowires in water

Average Length: 55 um

Diameter: 70 nm

Silver Nanowires (NW7055) can be used to fabricate transparent conductive films with higher haze values than Silver nanowires with 20 and 35 nm diameter. It can be used as conductive filler to formulate conductive ink to fabricate transparent conductive films with higher haze value (Haze of Substrate +2,5 to 3,5%) and considered as best alternative for Indium tin oxide (ITO) Film with high flexibility.  This type of transparent conductive film can be used in solar cells to improve efficiency. In fact, larger haze values lead to increased scattering, thus increasing the optical path length and light trapping inside the active layer.

Silver Nanowires in water

Average Length: 35 um

Diameter: 50 nm

Silver Nanowires (NW7055) can be used to fabricate transparent conductive films with higher haze values than Silver nanowires with 20 and 35 nm diameter. It can be used as conductive filler to formulate conductive ink to fabricate transparent conductive films with higher haze value (Haze of Substrate +2,5 to 3,5%) and considered as best alternative for Indium tin oxide (ITO) Film with high flexibility.  This type of transparent conductive film can be used in solar cells to improve efficiency. In fact, larger haze values lead to increased scattering, thus increasing the optical path length and light trapping inside the active layer.

Silver Nanowires in water

Average Length: 70 um

Diameter: 100 nm

Silver Nanowires (NW10070) can be used fabricate transparent conductive films with high haze value than Silver nanowires with 20, 35, and 70 nm. The haze value in this case can reach the haze of substrate + 4,5 to 5,5%. These types of transparent conductive films can be used in solar cells to improve efficiency. In fact, larger haze values lead to increased scattering, thus increasing the optical path length and light trapping inside the active layer.

Silver Nanorings & Nanowires In Water The combination of silver nanorings (AgNR) with silver nanowires (AgNW) creates better opto-electrical properties when compared with the same wire diameter of AgNW alone.

Size: 0.1 Liters
Diameter of rings: 10-20 um
Thickness of rings: 80-120 nm

Silver nanoparticles are nanoparticles composed of silver whose size ranges between 1 nm and 100 nm. These nanoparticles have unique optical, conductive, antibacterial, and thermal properties which make them ideal candidates as the base for many new technologies and products.

Silver Nanoparticles (Powder)
Average Diameter: 20 nm

Film Sheet Size: 24 cm x 30 cm

This product is transparent conductive film. PET was used as a transparent substrate. The film shows high transparency >90%, and low haze <1% at Sheer resistance of 100 ohm/sq.

The main applications of (transparent) conductive films are:

• Touch screens (smart-watches, mobile phones, tablets, car panels)
• Flexible displays (TVs, smart buildings)
• Smart Glass (PDLC, Electrochromic, photochromic, thermochromic?)
• Transparent Heaters
• Flexible Solar Cells
• Transparent Solar cells
• Flexible High-intensity LEDs and OLED (organic light emitting diode)

Water-based Conductive Inks to print Semi-transparent line/area with Screen Printing (Conductivity (S/m): > 106)

High viscous Conductive Ink
Water Based Silver Conductive Inks
Conductive fillers: Silver Nanowire
Recommend process:  Screen Printing

This product is ready-to-use Water based Conductive Ink for screen printing that can be used to print Semi-transparent lines and/or fabricate Semi-Transparent Conductive Film.  The substrate that can be used for these inks includes glass, PET, PMMA, PC, PI, PEI, etc.

This product can be used to fabricate Transparent Heaters.

High viscous Conductive Ink

UV-Curable Silver Conductive Inks

Conductive fillers: Silver Nanoparticles

Recommend process:  Screen Printing

This product is ready-to-use UV-Curable Conductive Ink (free of solvents), for screen printing that can be used to print conductive lines. The printed lines can be cured by UV light (LED) in a few seconds. The substrate that can be used for these inks includes glass, PET, PMMA, PC, PI, PEI, etc.

Water-based Conductive Inks to print Transparent line/area with Screen Printing (Conductivity (S/m): > 10^5)

• High viscous Conductive Ink
• Water Based Silver Conductive Inks
• Conductive fillers: Silver Nanowire
• Recommend process: Screen Printing

This product is ready-to-use Water based Conductive Ink for screen printing that can be used to print transparent lines and/or fabricate Transparent Conductive Film. The substrate that can be used for these inks includes glass, PET, PMMA, PC, PI, PEI, etc.

Silver Nanowires in water

Average Length: 20 um

Diameter: 20-25 nm

Silver Nanowire (NW2020) consider as an ultra-thin diameter with an aspect ratio >1000. It can be used as conductive filler to formulate conductive ink to fabricate transparent conductive films with low haze value (Haze of Substrate +0,35%) and considered as best alternative for Indium tin oxide (ITO) Film with high flexibility.

Silver Nanowires in water

Average Length: 5 um

Diameter: 20-25 nm

Silver Nanowire (NW2005) consider as an ultra-thin diameter and short length. This product is mainly used as a conductive filler to formulate conductive inks mainly for dispensing and ink-jet printing. By having short NWs, fabricating more stable low viscous inks that are normally used with these printing techniques is easier.

Silver Nanowires in water

Average Length: 40 um

Diameter: 35 nm

Silver Nanowire (NW3540) consider as high aspect ratio >1100 with relatively small diameters. It can be used as conductive filler to formulate conductive ink to fabricate transparent conductive films with low haze value (Haze of Substrate +0,7%) and considered as best alternative for Indium tin oxide (ITO) Film with high flexibility.